PrimaLine Neon 100 SB LED Tape Light

Side-Bending 24V Tape

PrimaLine 24V LED Neon tape light is the next generation of neon lighting made from silicone for increased flexibility. It can be used indoors and outdoors for dynamic, curved lighting installations. A rugged, ultra-flexible silicone housing provides protection, longevity, and 100% hotspot-free lighting. Our specially-made IP65 DIY solder-free connectors and end caps allow you to easily assemble robust, water-resistant installations in the field. The versatile mounting capabilities offer endless design possibilities!

 PrimaLine Neon 100 SB shines from the top and bends to the sides.

  • Continuous, even, hotspot-free LED lighting
  • Top-emitting / side-bending
  • Indoor/outdoor
  • UL Listed
  • 5-year warranty

Power Consumption per ft.: 3 Watts
Input Voltage: 24V DC
Tape Width: 0.47 inches
Tape Height: 0.65 inches
Beam Angle: 120°
Bend Radius: 2.36 inches
Cut-points: every 2 inches
Field Cuttable: UL Listed 2108
Max Run Length: 32 ft.
Dimmable: Yes
Ambient Temperature: -4° F to 113° F
Spool Lengths: 16.4 ft., 32 ft.
Location: Indoor/Outdoor (IP67); Dry/Wet
Certifications: UL Listed
Warranty: 5 Year Limited

16.4 ft. spool Item #32 ft. spool Item #VoltageKelvin Temp.
/ foot
/ foot
CRIMax. Run
AL-01-71-2405-SB AL-01-71-2425-SB 24V DC 2600K 3W 110 95 32 ft.
AL-01-71-2402-SB AL-01-71-2422-SB 24V DC 3000K 3W 115 95 32 ft.
AL-01-71-2406-SB AL-01-71-2426-SB 24V DC 4100K 3W 115 95 32 ft.
n/a AL-01-71-2431-SB 24V DC Red 3W n/a n/a 32 ft.
n/a AL-01-71-2432-SB 24V DC Blue 3W n/a n/a 32 ft..


Add -10 to the end of the connector item # to make a 10 pack of connectors.

Item #Desc.SizeQty
AL-01-71-9907-BS Bottom Connector (Side-Bend) 36 in. 1
AL-01-71-9907-DS Straight Connector (Side-Bend) 36 in. 1
AL-01-71-9907-RS Right Connector (Side-Bend) 36 in. 1
AL-01-71-9907-LS Left Connector (Side-Bend) 36 in. 1
AL-01-71-9923-AL Aluminum Mounting Track 40 in. 1
AL-01-71-9930 Flexible Mounting Track 20 in. 1
AL-01-71-9951 End Cap Assembly (Side-Bend) n/a 1
AL-01-71-9956 End Cap Assembly (Side-Bend) n/a 10
AL-01-71-9961 Silicone Caps n/a 1
AL-01-71-9966 Silicone Caps n/a 10
AL-01-71-9981 Aluminum Mounting Clip w/ Screws n/a 1
AL-01-71-9986 Aluminum Mounting Clip w/ Screws n/a 10